Finishing Up the New Garden Enclosure and Moving Tree Mulch
Tuesday May 1, 2018 Guerneville CA.
More garden enclosure work
One more day working on the garden enclosure and I should have it finished so I got to work.
I started out putting the chicken wire onto two of the rebar roof panels which are my last two panels for this enclosure. It took me most of the day to attach the wire to the two panels.
Putting up the roof panels
Once I had the wire attached to the two panels I installed them on the enclosure hooking the panels together with steel wire.
Here’s the new garden enclosure. It’s almost but not quite finished.
I still need to bury the anti-dig wire in the ground. I’ve just dug the ditch and I will bend the wire down and cover it back up with dirt.
That piece is done and covered back up.
Next I worked on burying the wire on the backside.
I eventually got all the wire buried so that job was done.
Hauling tree mulch
It was getting close to dark as I hauled several loads of tree leaf mulch to the new garden area.
I would of hauled more mulch, but it got to dark so I went on in the house for the day and that was my day. I still have two more enclosures like that one to build to complete this project.
(Visited 274 times, 1 visits today)